Dynamic DNS The DVR's external IP address may change from time to time unless your internet account is set for static ip. If using a PC or Mac to access the DVR from a remote location, or if changing DVR settings remotely, setting up port forwarding is recommended. You may skip the next two steps if you choose to use the cloud for remote access.
If using cloud mode, setting up port forwarding and dynamic DNS is not necessary. Click OK Cloud vs Port Forwarding If your remote access to the DVR will be using phone or tablet only, you may use cloud mode to access the DVR. Set HTTP Port to 7000 (if not being used by other devices on the same external IP). If 7001 is already used by another device on the local network, try using another available number. Set Media Port to 7001 (if not being used by other devices on the same external IP) or other unused port. The DNS number can be either your Gateway number, or the DNS address provided by your ISP. Set the Subnet and Gateway numbers to be same as the PC's. Here we have selected "112" for the last 3 digits. Some routers may have additional restrictions on the range of allowed addresses. The last 3 digits should be less than 254 and greater than 1. If you don't know which addresses are already in use, check your router's list of connected devices. The last 3 digits must be unique on the network (not used by any other device including the default gateway). Uncheck DHCP enable Set the IP address to the same as the PC's except the last 3 digits. The default login is admin with no password.
Cannot see my dvr on vmeyesuper mac os#
If using Mac OS X, go to System Preferences > Network > Advanced and note the IPv4 address, subnet mask, and router (gateway) address. Write down the IP address, subnet mask, and default gateway. If using Windows 8, press Windows + X and select "Command Prompt" Type in "ipconfig" and press enter. On a computer connected to the same router as the DVR: Go to the Start Menu and Search or Run "cmd". 1 DVR Network Setup Connect the DVR to a router using a networking cable.
0 kommentar(er)
